***This is a Pre-Order Product*** Please Read our Pre-Order Policy carefully AND | OR Contact Us before placing your order.
Time Effects Processor with 3 Independent Effects
- Analog Spring Reverb with a 3-Spring Tank and a Unique Pitch Modulation Circuit
- Stereo Analog BBD Chorus-Flanger with 3 LFO Waves
- Stereo Digital Delay with 3 Delay Types and Freeze Function
- Variable Input and Output Gain Controls (from MIC to Eurorack Levels)
- Preset Memory up to 49 Presets
HYPNOSIS is our first multi effect and we are extremely excited about the final result!
Our love for Analog Effects and the 80s Nostalgia forced us to develop this little box, in which you can plug your synths, guitar or even a mic and have a dreamy and out of this (cruel) world sound…
GO BACK IN STRANGER TIMES WITH THIS U-N-R-E-A-L TIME MACHINE
The Dreadbox Hypnosis time-effects processor is a sweet multi-effects processor for your synthesizer rig. Featuring a real spring reverb with a 3-spring tank, a stereo analog bucket brigade chorus/flanger, and a stereo digital delay with three delay types and a freeze function, Hypnosis is ready to add spacious effects that drip with sonic character. It's variable input and output gain controls accommodate signal levels ranging from Microphones to Line to Eurorack levels, for maximum flexibility in your studio. And with the ability to store and instantly recall 49 custom presets, the Dreadbox Hypnosis effects processor nails the balance between sweet analog tone and modern digital convenience.
TIME will control the delay time in its whole range - that is if depth knob is at 0%. As you add depth, time knob will have a shorter effect. When 100% depth is there, time knob does nothing. Delay time can be set from 2.5ms up to 50ms.
DEPTH this indicates the amount of LFO applied to the Delay time. As you turn up the knob, the time control will have a smaller range. And when it’s at max, time control has no effect. In order to access the “Comb” Filter, keep this control at 0%.
RATE sets the speed of the LFO, from 10Hz up to 15sec. When on Stereo setup, each channel has a reverse movement, which gives the feeling that the LFO rate is half than the set one.
FEEDBACK this sets the delay feedback. Be careful as some volume boost is taking place as you go on high feedbacks , so take care not to peak the next effects in the order.
TIME sets the Delay time from about 40ms up to 450ms MIX sets the level of the Delayed signal
FEEDBACK sets the amount of repeats. When at max, repeats are infinite.
FREEZE is a method to loop your current delayed signal, meaning that if no repeats are audible or active, freeze will have no effect when pressed. Freeze will actually do 2 simultaneous functions: A. Feedback level is set to max B. Any new incoming signal will not be delayed. This will be active only while the button is pressed. Mix and Time controls, can still be used while holding down the Freeze button.
The 3-Spring Tank Reverb.
PRE-DELAY sets the Initial Delay time
DEPTH sets the level of the modulation applied to the initial Delay
RATE sets the speed of the LFO, from 10Hz up to 15sec.
AMOUNT blends the Dry and Wet signal. ATTENTION! THE SPRING REVERB IS MONO When on Stereo setup, the Reverberated signal will be applied to both Left and Right Outputs, meaning that if you send a Stereo signal Input, the Reverberated signal will blend both Left and Right Inputs and send them to both Outputs. But this will only happen for the Reverberated signal, the Dry signal will always be Stereo.
New Version Updates:
- More reliable push buttons with Red LED instead of White
- New micro controller and DAC convertors with updated Firmware for smoother operation
- Reworked Analog Signal for noiseless experience
- Circuit: Analog + Digital
- Audio: Mono/Stereo
- Accepts Levels: Line/Mic/Eurorack I/O
- Inputs / Outputs: 2xIN/2xOUT : TS Unbalanced 6.35mm jacks
- Power Supply: 15VDC (INCLUDED)
- Dimensions (cm): 16.8x27x4
- Weight: 1.36 kg